Best sellers
35 products
Sort by:
35 products
Black or Titanium finish, aluminium ring and integrated blue LED. Type E socket with rotary switch, designed for Eubiq power tracks.
Why choose the FR3
A quarter turn is all it takes to power on or cut the supply. The blue LED shows the status at a glance. No more phantom standby.
Move, add or remove the socket on the track in seconds, without tools. A flexibility unique in the world of electrical fittings.
Technical specifications
| Socket type | French, type E (2 poles + earth) |
| Voltage | 220 - 250 V |
| Maximum current | 16 A |
| Protection rating | IP24 |
| Certifications | IEC/EN 60884, NF C 61-314 |
| Finish | Black or Titanium, anodised aluminium ring |
| Indicator LED | Blue (power-on indication) |
| Integrated switch | Quarter-turn rotary (mechanical click) |
| Dimensions | Diameter 6.7 cm, depth 4.46 cm |
| Packaging dimensions | 8 x 8 x 7 cm |
| Weight | 150 g |
Installation in 3 steps
Position the socket on the Eubiq track at the desired location. No tools required.
Turn a quarter turn clockwise. A mechanical click confirms engagement. The blue LED lights up: the socket is live.
Plug in your device. To cut the power, turn an eighth of a turn anticlockwise: the LED goes out, the socket is no longer live.
Compatibility
- All tracks in the Eubiq range
- Type E (French, central earth pin)
- Type F (Schuko, side earth clips)
- Type C (Europlug, 2 pins without earth)
The French type E socket is recognisable by its central male earth pin. The Schuko type F socket uses two side earth clips. Plugs of both types are compatible with Eubiq FR3 and GS3 sockets.
Strengths of the Premium range
- Premium design: aluminium ring and blue light ring for offices, open-plan kitchens or coworking spaces
- Energy saving: the integrated switch cuts the power without unplugging, eliminating standby consumption
- NF certification: full compliance with French standards IEC/EN 60884 and NF C 61-314
- Blue indicator LED: minimal consumption (a few milliwatts), negligible impact on your bill
Frequently asked questions
Appliances with a type C (Europlug), E or F plug connect directly. For type G (United Kingdom) or A/B (United States) appliances, choose the BS British or ITL international sockets.
The IP24 rating protects against water splashes from all directions, but the track on which the socket is mounted is IP4X: it is protected against the insertion of objects, not against water splashes. Consult an electrician for any installation in a damp environment.
Additional information
| Brand | Eubiq |
| Range | Premium |
| Documentation | Eubiq power socket user guide available for download |
This socket is designed exclusively for use on Eubiq-compatible tracks. If in any doubt about the electrical installation, call on a professional electrician.
Add the FR3 Premium socket to your Eubiq installation
Add to cart
USB-C + USB-A · For iPhone and Android on both ports
Two ports for charging your devices every day. The USB3QC can charge iPhones and Android smartphones on either of its two ports: one is USB-C, the other USB-A. Choose the port based on your cable connector, not your phone brand. Compact cylindrical design with an aluminum ring, blue indicator LED, and built-in ON/OFF switch. Slides into any Eubiq power track in one motion.
Two connectors, the same freedom of choice
Neither port is reserved for Apple or Android. Both can charge your iPhone or Android smartphone with a cable suitable for your device.
Charge your iPhone or Android smartphone with a cable that has a USB-C connector on the charger end and a connector suitable for your phone on the other end.
On the charger: the small port with rounded ends, located above the USB-A port.
Charge your iPhone or Android smartphone with a cable that has a USB-A connector on the charger end and a connector suitable for your phone on the other end.
On the charger: the large rectangular port, located below the USB-C port.
For your Apple and Android devices
iPhone with Lightning connector
Use a USB-A to Lightning or USB-C to Lightning cable, depending on the port you choose on the charger.
iPhone and Android with USB-C connector
Use a USB-A to USB-C or USB-C to USB-C cable, depending on the port you choose on the charger.
iPad
The charger can also charge compatible Apple tablets with a suitable cable. This product cannot charge a MacBook.
A design built to last
-
Built-in ON/OFF switch
Cut the power without unplugging your cables. Convenient and energy-efficient.
-
Blue indicator LED
An immediate visual indicator to show whether the charger is active. Turns off with the OFF switch.
-
Aluminum ring
The ring is made of aluminum, not the entire charger housing.
-
Ultra-compact design
Ø 6.7 cm × 5.5 cm deep — nothing protrudes, everything is compact.
-
Only 160 g
Lightweight yet sturdy, it integrates into your setup without adding bulk.
-
Compatible with universal Eubiq power tracks
Fits all track models in the Eubiq range.
Technical specifications
| Feature | Detail |
|---|---|
| Brand | Eubiq |
| Reference | USB3QC |
| Input voltage | 220 – 250 V (standard European mains) |
| Output connectors | 1 USB-A port and 1 USB-C port |
| Smartphone compatibility | iPhone and Android on both ports, with a suitable cable |
| Dimensions | Ø 6.7 cm × 5.5 cm (depth) |
| Weight | 160 g |
| Switch | Yes, built-in ON/OFF |
| Light indicator | Blue LED (power-on indicator) |
| Track compatibility | All tracks in the Eubiq range |
| Certification | CE |
Compatible devices
This USB-C and USB-A fast charger works with a wide range of recent devices:
⚠️ This product cannot charge a MacBook. For other devices, use a suitable cable and check their compatibility with the charger. The presence of a USB-A or USB-C connector does not guarantee a particular charging speed on its own.
Installation in 4 steps
Insert the USB3QC into your existing Eubiq power track — the snap-in system is designed for tool-free installation in a few seconds.
Lock the module into position. The blue LED lights up as soon as it is powered on.
Choose the USB-A or USB-C port depending on your cable connector. Both ports can charge iPhones and Android smartphones with a suitable cable.
Toggle ON/OFF to cut the power to the charger without affecting the rest of your setup.
Frequently asked questions
Yes. Both the USB-A port and the USB-C port can charge an iPhone or Android smartphone. Simply use a cable suitable for the chosen port and your phone connector.
Their connection format: one is USB-A and the other is USB-C. Neither is reserved for a phone brand.
No, the USB3QC cannot charge a MacBook.
The USB3QC is CE certified and includes standard protections against overvoltage and short circuits. Like any electronic device, make sure not to obstruct it and use it in a well-ventilated environment.
The USB3QC module is specifically designed for tracks in the Eubiq range. It is not compatible with power strips or tracks from other manufacturers.
The blue LED is linked to the module's ON/OFF switch: it turns off as soon as you toggle the switch to OFF. Convenient in a bedroom or room requiring darkness.
Why choose Eubiq?
Recognized Singaporean brand
Modular, premium power solutions designed for durable, professional installations.
Sleek, reliable design
Unlike generic chargers, Eubiq modules integrate into a cohesive ecosystem of tracks and technical accessories.
Built to last
Equipment you don't notice until you need it — and then it's there. Guaranteed long-term reliability.
Compact and discreet, with an aluminum ring.
One USB-A port and one USB-C port to charge your iPhones and Android smartphones with a suitable cable.
Aluminum ring. Body in a Titanium or black finish depending on the variant chosen. Integrated switch and blue LED for your Eubiq track installation.
Key features of this socket
The integrated switch allows you to control the power supply without unplugging the device.
The blue LED allows you to see if the socket is live.
Position your socket on your Eubiq track in the location that best suits your needs.
Ring and body finish
Aluminum ring. Body in a Titanium or black finish depending on the variant chosen.
Technical specifications
| Socket type | Type F (Schuko) |
| Ring | Aluminum |
| Voltage | 220 to 250 V |
| Maximum current | 16 A |
| Protection rating | IP20 |
| Dimensions (socket) | Ø 6.7 cm x depth 4.46 cm |
| Packaging dimensions | 8 x 8 x 7 cm |
| Weight | 150 g |
| Indicator | Blue power-on LED |
| Switch | Integrated |
| Mounting | Eubiq compatible tracks |
Compatibility and socket type
Choose this socket for devices with a plug compatible with Type F (Schuko).
Installation and use
Place the module on your Eubiq track in accordance with the user guide.
Connect your device to the socket with a compatible plug, respecting the electrical specifications of the module.
Then activate the socket by turning it a quarter turn. The blue LED indicates that it is live.
Frequently asked questions
What type of plug should I use?
Choose this socket for devices with a plug compatible with Type F (Schuko).
What material is the ring made of?
Aluminum ring. Body in a Titanium or black finish depending on the variant chosen.
Where should I install this socket?
On the compatible tracks in the Eubiq range. The integrated switch allows you to control the power supply and the blue LED indicates that it is live.
Use this module exclusively on compatible Eubiq power tracks and follow the product documentation. For any questions regarding electrical installation, consult a qualified electrician.
The wall socket reinvented, by Eubiq
No more unsightly power strips on the floor. The SH1 track transforms your wall into an intelligent power hub: add, move, or remove your sockets and chargers as you wish, on a slim and discreet brushed aluminium profile. Available from 60 to 120 cm, in brushed aluminium or brushed black finish.
Why choose the SH1 track?
Modular placement
Add or reposition your sockets, USB chargers and accessories wherever you like along the entire length of the track. Your installation evolves with your needs.
4 lengths available
60 cm, 80 cm, 100 cm or 120 cm: choose the dimension that suits your space. The track can even be shortened by up to 9 cm.
Two refined finishes
Brushed aluminium for bright and contemporary interiors, or brushed black for a more modern and industrial touch.
Connectable tracks
Connect several tracks together using the connectors built into each end, to cover large lengths without interruption. For custom lengths with angles, choose the SH1 conduit supplied bare and fully configurable, in the "Custom Track Conduit" collection.
Kitchen hooks and bars
A groove under the track allows you to clip on hooks or bars to hang your kitchen utensils. Dual function, zero clutter.
RJ45 compatible
Up to 3 network ports available via the DS4 box (sold separately). Power and connectivity combined on a single track.
Technical specifications
Capacity by length
| Length | Sockets | Recommended use |
|---|---|---|
| 60 cm | 5 | Small worktop, bedside, compact desk |
| 80 cm | 8 | Standard desk, medium-length kitchen backsplash |
| 100 cm | 10 | Large kitchen, TV unit, shared workspace |
| 120 cm | 13 | Large backsplash, meeting room, professional counter |
To create custom lengths with angles, choose the SH1 conduit, supplied bare and fully configurable, in the "Custom Track Conduit" collection. This is a modular solution, distinct from the SH1 track presented here in standard lengths.
Where to install the SH1 track?
Kitchen backsplash
Multiply your power points above the worktop. Also hang your utensils under the track using the integrated groove.
Desk and remote working
Power PCs, screens, lamps and chargers from a sleek track, positioned high on the wall or at the back of the desk.
TV unit and living room
Integrate the track behind or under your TV unit to centralise power cables discreetly.
Professional spaces
Meeting rooms, counters, showrooms: the SH1 offers clean and scalable power in all work environments.
Installation in 4 steps
Choose length and finish
Assess the available space on your wall or furniture and select the appropriate length (60, 80, 100 or 120 cm). The track can be shortened by up to 9 cm if necessary.
Fix the surface-mounted track
Screw the track directly onto your wall or support. The surface-mounted installation ensures a solid and durable hold.
Connect the power supply
The track has a connection at each end. Leave the electrical connection to a qualified electrician. Several tracks can be connected together.
Clip on your sockets and accessories
Insert your Eubiq sockets, USB chargers or blank covers into the desired slots. Reposition them at any time according to your evolving needs.
⚠️ Electrical connection must be carried out by a qualified electrician, in accordance with current standards. Sockets, USB chargers and accessories are sold separately.
Compatible accessories
The SH1 track accommodates all EUBIQ sockets, not just French Type E sockets: French FR3 and FR4, Schuko GS3, British BS3, international ITL3 and Italian ITA3. Choose the model that suits your device's plug.
USB-A and USB-C for charging smartphones and tablets directly from the track
Network connectivity — up to 3 ports available (sold separately)
Clip into the lower groove of the track — ideal for the kitchen
To neatly cover unused slots
Frequently asked questions
Can the SH1 track be cut to the desired length?
Yes, the SH1 track can be shortened by up to 9 cm maximum. This operation involves removing the RJ45 slots located at the ends. For custom lengths with angles, choose the SH1 conduit supplied bare and fully configurable, in the "Custom Track Conduit" collection.
Can several SH1 tracks be connected together?
Absolutely. Each track is equipped with a connection at each end, allowing several tracks to be connected together to cover large lengths. For a custom configuration with angles, choose the SH1 conduit supplied bare, to be assembled according to your needs in the "Custom Track Conduit" collection.
Is the SH1 track suitable for installation in a kitchen?
Yes, with its IP40 protection rating, it is suitable for use in the kitchen (excluding areas of direct water projection). The groove under the profile allows you to hang bars and hooks for your utensils.
What is the difference between the brushed aluminium and brushed black finish?
It is purely an aesthetic difference. Both versions share the same technical specifications. The brushed aluminium finish blends into bright kitchens and contemporary interiors, while brushed black provides a more modern and industrial touch.
Are the sockets included in the delivery?
No. The SH1 track is sold without accessories. Sockets, USB chargers and other modules are to be ordered separately from the Eubiq range.
Product information
The Eubiq SH1 track is the promise of an interior that is finally organised, without compromising on style. Infinitely modular, available in two refined finishes and designed to last — it adapts to your space, not the other way around.
Discover compatible accessories
The designer socket track that revolutionizes your worktop
No more tangled cables or unsightly power strips. EUBIQ's E-Genesis track combines modular power supply, integrated cable management and a brushed aluminium design — for impeccable organization in kitchens, offices or professional spaces.
Why choose the E-Genesis track?
A complete modular system that combines three features rarely found on the market:
Integrated cable management
Slide excess cable into the dedicated compartment under the track. No more trailing wires, no more visual clutter.
Sockets repositionable at any time
Move, add or remove your sockets on the track without any tools. Flexibility at your fingertips.
Brushed aluminium design
A sleek and elegant finish that blends perfectly into a contemporary interior — kitchen, office or living room.
Which length to choose?
The E-Genesis track is available in three standard lengths, each offering a specific number of slots for your EUBIQ sockets and accessories:
Ideal for a small worktop or compact desk
The format suited for most kitchen splashbacks
For large spaces and intensive professional use
E-Genesis tracks cannot be cut and are not designed to be connected together. For a custom length or lengths greater than 120 cm, please consult our range of designer cable trunking and power strips.
Technical specifications
For what uses?
Thanks to its modularity and discreet design, the E-Genesis track adapts to a multitude of environments:
Kitchen splashback
Power your food processor, kettle or toaster without visible cables.
Home or professional office
Neatly manage the power supply for your IT setup.
TV unit / home cinema
Group all the sockets for your multimedia equipment on a single track.
Hotels, restaurants, coworking spaces
A neat and scalable installation for demanding professional environments.
Workshops and technical spaces
A robust and certified track for intensive daily use.
How to install the E-Genesis track?
The installation is accessible, but must be carried out or validated by a competent person for the electrical connection.
Choose the power supply side
Left or right depending on the selected reference, based on the location of your wall cable socket.
Position the track on the wall
At the desired location (splashback, desk top, etc.) and mark the fixing points.
Screw the track onto the surface
Using the fixings provided on the aluminium profile for this purpose.
Connect the power supply
By a qualified electrician if you are not authorized.
Insert your sockets and accessories
In the location of your choice along the track — and reposition them whenever you want, without any tools.
Store the cables
Slide excess cables into the integrated storage compartment under the track.
Tip: Remember to anticipate the power supply side before ordering your track. Once in place, the connection direction is not interchangeable without changing the reference.
Compatible accessories
The E-Genesis track accommodates all the sockets in the EUBIQ range, regardless of their socket type or the country they are intended for. It is not limited to French Type E sockets. You can also add EUBIQ USB chargers:
All EUBIQ sockets
French FR3 and FR4, Schuko GS3, British BS3, international ITL3 and Italian ITA3 sockets: choose the model suited to your device's plug. All these models fit on the same track.
USB-A and USB-C chargers
Charging smartphones, tablets and connected accessories.
International sockets
Practical for spaces welcoming foreign visitors.
USB sockets and chargers are sold separately. RJ45 modules cannot be installed on the E-Genesis: to integrate RJ45 connections, choose the SH1 track.
Frequently asked questions
Can several E-Genesis tracks be connected together to cover a greater length?
No. E-Genesis tracks are not designed to be interconnected. For longer or custom-made installations, we recommend turning to the range of designer cable trunking and power strips available on our website.
Can the E-Genesis track be cut to the desired length?
No, the E-Genesis track cannot be cut. It is offered in three fixed lengths: 60 cm, 90 cm and 120 cm. Choose the length best suited to your space.
Are the sockets included with the track?
No. The E-Genesis track is sold alone, without accessories. All EUBIQ sockets, regardless of their type, as well as EUBIQ USB chargers, are available separately in our shop and fit freely into the track.
Can an RJ45 connection be added to the E-Genesis?
No. The E-Genesis does not allow the installation of RJ45 modules. To integrate RJ45 connections, choose the SH1 track.
Is the E-Genesis track available in black?
Yes! In addition to the brushed aluminium finish, the E-Genesis track is also available in a brushed black finish to match dark interiors or contemporary black kitchens.
What is the difference with a classic electrical plasterboard track?
An electrical plasterboard track is used for routing conduits in a partition. The E-Genesis track, on the other hand, is a modular and designer surface-mounted power supply system, intended for visible and daily use on a worktop, splashback or desk.
Practical information
- BrandEUBIQ
- WeightVaries depending on the track length
- Product dimensions62 × 10 × 12 cm (60 cm model)
- FinishesBrushed aluminium — Brushed black
- Lengths60 cm / 90 cm / 120 cm
- InstallationSurface-mounted, screwed to the wall
No more tangled cables and unsightly power strips.
The EUBIQ E-Genesis track: sockets where you need them, cables that disappear, an interior that can finally breathe.
The power track designed to blend into your furniture
No more unsightly power strips. The RH2 track is designed to be recessed into your furniture and accepts sockets, USB chargers, and accessories that can be positioned anywhere along its length. Available in 4 lengths and 2 finishes.
Why choose the RH2 track?
The track is recessed into the furniture and its front face protrudes by only 2 mm from the support. The 8 cm corresponds to the total width of the track, not its protrusion.
Change the location of your sockets without drilling or rewiring. Reposition or add modules at any time, without tools.
Add modules as needed without replacing the track. 2P+T sockets, USB chargers, RJ45 boxes… everything is compatible.
Brushed aluminium, IEC/EN 61534 certified, 32 A conductors. Used in high-end hotel and commercial projects.
Two finishes to suit any interior
Bright and discreet, perfect for white kitchens, light-colored furniture, and minimalist spaces
Elegant and modern, ideal for industrial interiors, dark offices, or black kitchens
Complete technical specifications
Available lengths and slots
The RH2 track is available in 4 standard lengths. The longer the track, the more slots you have to clip on your compatible EUBIQ modules.
| Track length | Socket slots | RJ45 slots |
|---|---|---|
| 60 cm | 5 slots | Up to 3 |
| 80 cm | 8 slots | Up to 3 |
| 100 cm | 10 slots | Up to 3 |
| 120 cm | 13 slots | Up to 3 |
For what applications?
The RH2 track is designed to be recessed into furniture. Its modular design allows you to integrate the electrical power supply into the furniture, both in residential and professional environments.
Unlike a classic power strip, the RH2 recessed power track blends into your furniture. Its 8 cm wide front face remains visible and protrudes by 2 mm from the support. The recessing depth is 3.4 cm. The result is clean, professional, and remarkably discreet.
How to install the RH2 track in a piece of furniture?
Choose from the standard lengths (60, 80, 100 or 120 cm) according to the available space and the desired number of sockets. For a custom length, choose the RH2 conduit in the "Custom Track" collection.
Check the material of the furniture and the compatibility of the mounting method before making the cut according to the installation guide: 7 cm of recessed width and 3.4 cm of depth.
Insert the track into the cut in the furniture and fix it according to the installation guide. The support depends on the material of the support and the chosen mounting method. Once recessed, the front face of the track protrudes by 2 mm from the support.
Via one of the two connections located at each end of the track (or both if you connect several tracks together).
2P+T sockets, USB chargers, universal sockets, RJ45 boxes… anywhere you need them, at any place on the track.
Modularity: compose your track as you wish
This is the main asset of the EUBIQ system: total modularity. The RH2 track is not delivered with fixed sockets. You freely choose the modules to clip on it according to your current needs, and you can reposition them or add them at any time, without tools.
Type E, French standard
For international use
Built-in fast charging
DS3 or DS4, up to 3 per track
Integrated network connectivity
The RH2 track is not limited to electrical power. You can integrate up to 3 RJ45 slots by replacing the neutral covers located at the ends with DS3 or DS4 boxes (sold separately). An ideal solution for fixed workstations, meeting rooms, or offices where a wired connection is essential.
Connect several RH2 tracks together
Each RH2 track is equipped with an electrical connection at each end, allowing you to connect several tracks in a row. To create an installation at the desired length, choose the RH2 conduit in the "Custom Track" collection, rather than limiting yourself to the standard lengths presented on this data sheet.
Certification and safety
International standard for conduit and power track systems
Compliance with European electrical safety directives
Protection against the penetration of solid bodies greater than 1 mm
Oversized compared to the power supply (16/20 A) for enhanced safety and durability
Additional information
The EUBIQ RH2 recessed power track is the perfect combination of sleek design and functionality thought out down to the smallest detail. Install it once, adapt it for life.
Kitchen furniture, desk, or professional furniture: discreetly integrate the electrical power supply into your furniture.
Discover compatible modules
Bring wireless charging to your Lightning iPhone
Does your iPhone lack native induction charging? The Qi2001 receiver is the simple and elegant solution: plug it into the Lightning port, place your smartphone on any Qi charger, and charging begins instantly. 20g, 5.5mm thick — you'll almost forget it's there.
What is the Qi2001 receiver?
The Qi2001 receiver is a wireless charging adapter specifically designed for iPhones equipped with a Lightning connector (iPhone 5, 5S, 5C, SE 1st gen, 6, 6 Plus, 6S, 6S Plus, 7, and 7 Plus). It plugs discreetly into your device's Lightning port and provides compatibility with any standard Qi induction charger.
Designed by the Qinside brand, this ultra-slim receiver slips easily behind your phone, even with certain cases. A blue LED light indicates the connection status. Simple, reliable, efficient.
Why switch to wireless charging?
Simply place your iPhone on the pad and enjoy clean, frictionless daily charging.
Only 5.5 mm thick and 20 g — you'll almost forget it's there, even when tucked under a slim case.
Compatible with all Qi-certified wireless charging stations, regardless of the brand.
No apps, no setup. The receiver works as soon as it is connected to the Lightning port.
Avoid Lightning port wear by reducing repetitive plugging and unplugging thanks to induction charging.
A blue LED indicator confirms instantly that charging is underway. No doubt, no surprises.
Technical Specifications
Compatibility: which iPhones?
This receiver is designed for all iPhones with a Lightning port that do not have native Qi wireless charging:
How to use the Qi2001 receiver?
Frequently Asked Questions
Product Information
Your iPhone 5, 6, or 7 also deserves to enjoy wireless charging.
The Qi2001 receiver offers this freedom in seconds:
Plug · Place · Recharge
Compact, universal, and so practical for daily use — it's the little accessory that truly changes the way you charge.
Complete the non-electrified areas of your EUBIQ installation
The SFC2D is a blind panel with no electrical function, designed for RH2 and SH1 modular trunking. Pair it with SFC3 electrical segments and cut it to close off non-electrified sections and achieve the desired length, with a uniform brushed aluminum finish.
Why choose this blind panel?
Closes off empty spaces
Closes off sections of trunking that are not equipped with SFC3 electrical segments.
Brushed aluminum finish
Visually extends your installation with a neat and discreet finish.
Cut to the desired length
Supplied in 100 cm lengths, the SFC2D can be cut to complete SFC3 segments and adjust the final length of your installation.
Electrify only the useful areas
Reserve SFC3 segments for locations where you want to use your EUBIQ sockets and complete the other sections with SFC2D.
What is a trunking blind panel used for?
A modular installation combines electrified areas created by SFC3 segments and non-electrified sections closed off by the SFC2D. The blind panel makes it possible to adapt the final length to the project without electrifying the entire trunking.
- Closes off empty spaces between SFC3 segments
- Adjusts lengths by cutting the blind panel
- Provides a continuous finish on non-electrified sections
- Compatible with RH2 and SH1 modular trunking
On an SH1 installation, for example, you can create a route with corners or wrap around a room, electrifying only certain areas. SH1 trunking uses the same profile as the SH1 tracks sold in 60, 80, 100, and 120 cm lengths; the modular solution allows you to customize the layout.
Technical specifications
Compatibility: modular trunking
Choose the profile suitable for your layout, then complete its non-electrified areas with the SFC2D.
Recessed into furniture
The RH2 is designed to be recessed into furniture. Its total width is 8 cm, with a 2 mm protrusion after recessing. It was not developed for partitions: this use requires checking the material and method of attachment.
Surface-mounted installation
For a custom wall route, a custom length, or wrapping around a room. Pair the SFC3 segments and SFC2D blind panels to choose the areas to electrify.
To complete the assembly, plan for the trunking, SFC3 segments, SFC2D blind panels, end caps, corners, connectors, and other accessories suitable for the project. The SFC2D closes off non-electrified longitudinal sections; it does not replace end caps.
Brushed aluminum finish
The blind panel completes non-electrified sections without interrupting the appearance of your installation.
Brushed aluminum finish for the closed-off sections.
A 100 cm length to be cut down according to the spaces to be closed.
How to prepare and install the SFC2D?
Measure the lengths to be closed in your RH2 or SH1 trunking, taking into account the planned SFC3 segments.
A hacksaw is suitable. For a more professional cut, use a circular saw equipped with a blade suitable for aluminum. Hold the piece securely, follow the tool's safety instructions, and deburr the edges after cutting. The adjustment described applies to the SFC2D, not the SFC3 electrical segment.
Place the SFC2D in the locations provided by the profile, following the component documentation.
Check the fit with the adjacent segments and plan for the trunking end caps. Any work on the electrical installation must be carried out by a qualified electrician, with the power turned off.
Frequently asked questions
What is the difference between SFC2D and SFC3?
The SFC3 creates an electrified area designed to receive EUBIQ sockets. The SFC2D is a blind panel with no electrical function that closes off the other sections and makes it possible to adjust the final length.
How do I calculate the quantity to order?
Add up the lengths to be closed off, then plan for the cuts in the 100 cm elements. Take into account the distribution of the different sections and the cutting losses, not just the total length.
Can the electrified areas be changed later?
The configuration can be revised by combining the appropriate SFC3 and SFC2D elements. Any electrical modification must be prepared and carried out by a qualified electrician.
Does the SFC2D replace an end cap?
No. It closes off a section of the trunking along its length. End caps are separate elements to be planned for closing off the ends of the profile.
SFC2D: the right length, in the useful places.
Complete your SFC3 segments and ensure a neat finish for your modular installation.
Showing 8/35
NextCollections featured
The French specialist in designer electrical tracks since 2008. Exclusive Eubiq importer in Europe — Dilectro Ltd.
The French specialist in designer electrical tracks since 2008. Exclusive Eubiq importer in Europe — Dilectro Ltd.
- Choosing a selection results in a full page refresh.
- Opens in a new window.