SFC2D, Shutter 100 cm - Brushed aluminium finish

A track blanking cover is a neutral closing panel with no electrical function, designed to fill empty spaces in a modular electrical rail. In practice, when you build a custom installation with sockets, USB modules, or switches, there are often unused rail segments. Without a blanking cover, these spaces remain open, which detracts from the aesthetics and can pose safety issues. The SFC2D therefore plays an essential role: it neatly closes these empty areas to ensure a uniform and polished finish along the entire length of your EUBIQ track.

The SFC2D blanking cover is specifically designed to fit into the modular rails of the EUBIQ range. It is compatible with three distinct profiles: the RH1, a surface-mounted horizontal rail particularly suitable for kitchens, offices, and workshops; the RH2, a horizontal rail that can be recessed into walls or furniture; and the SH1, a rail intended for horizontal surfaces or recessed floors. If you use one of these profiles, the SFC2D will fit perfectly into the grooves provided for this purpose without any modification to the rail.

Yes, absolutely. This is one of the major advantages of this blanking cover: it can be cut to the desired length. Delivered in 100 cm (1,000 mm) lengths, it can be easily adjusted using a fine hacksaw to match the exact space available in your rail. The operation is simple and requires no special skills. You just need to accurately measure the empty space between your electrical segments, mark the measurement on the blanking cover, and cut it neatly. The brushed aluminum profile cuts cleanly and retains a neat appearance after cutting.

These two references occupy the same space in the EUBIQ rail, but their functions are completely different. The SFC3 is an active segment: it incorporates electrical sockets or other functional modules and requires connection to the electrical circuit. The SFC2D, on the other hand, is a passive segment: it has no electrical function and is used solely to blank off and aesthetically finish parts of the rail without sockets. The great advantage of the EUBIQ modular system is that you can replace an SFC2D with an SFC3 at any time if your needs evolve, without having to modify the entire installation.

Brushed aluminum offers several concrete advantages over plastic. In terms of durability, it is much more resistant to impact, scratches, and corrosion, even in intensive use environments such as a professional kitchen or a workspace. Its matte, contemporary look harmonizes naturally with modern and industrial interiors while remaining discreet. It is also very easy to maintain: a simple, slightly damp cloth is enough to clean it. Finally, unlike plastic, it does not yellow over time and maintains its neat appearance for a long time.

No, the SFC2D blanking cover is designed exclusively for indoor use. It does not have a sufficient protection rating to withstand bad weather, outdoor humidity, or significant temperature variations. If you wish to install a track in an environment exposed to moisture or water—such as a covered patio, a utility room, or a wet room—we recommend that you choose suitable solutions with an IP rating appropriate for your usage context.

Each SFC2D blanking cover is 100 cm long. To estimate the quantity you need, simply calculate the total length of the rail not occupied by active electrical segments. For example, for a 3-meter rail where 2 meters are equipped with sockets and modules, you will need 1 blanking cover to cover the remaining meter. Remember that the SFC2D can be cut, which allows you to order exactly the quantity you need without unnecessary surplus. When in doubt, it is better to provide slightly more so that you can adjust it freely during installation.