Surface-mounted trunking
The SH1 trunking integrates perfectly into a kitchen or around the perimeter of a room, with options for corners, RJ45 sockets, and cable routing. Sold in 310 cm lengths that can be cut to size, it can be electrified with SFC3 segments or protected with the SFC2D cover. Clip-on bars and hooks can be attached under the trunking to hang your utensils. Available in brushed aluminum or brushed black.
10 products
Sort by:
10 products
Elegance and functionality for your electrical installations
Much more than a simple electrical trunking: a complete wall-mounted electrification system in brushed black aluminum with 2 independent compartments, compatible with the entire EUBIQ ecosystem. From industrial lofts to contemporary kitchens, the SH1 transforms every meter of wall into a clean, organized, and durably reliable installation.
Why choose SH1 trunking?
Premium finish
Anodized brushed black aluminum: a high-end aesthetic finish that fits into any interior style, from designer offices to contemporary kitchens.
2 separate compartments
Power lines on one side, low-voltage lines on the other thanks to the separator clip. Ethernet, phone, and HDMI cables organized without interference.
Custom-cuttable
Supplied in 150 cm, the SH1 can be cut with a hacksaw to suit your needs. The aluminum allows for a clean, precise cut every time.
Aluminum vs PVC
More resistant to heat, impact, and deformation over time than classic PVC trunking. Lightweight, durable, and recyclable.
Technical specifications
3 main application areas
Kitchen & worktop
Ideal as an aluminum kitchen baseboard. Install it under your wall cabinets to house your electrical outlets. The groove underneath allows you to clip in hanging bars or hooks for your utensils — a remarkable space-saving solution.
Office & workspaces
The second compartment is perfectly suited for running low-voltage cables: Ethernet RJ45, phone, HDMI. Install RJ45 sockets directly into the trunking for a wired, organized workstation with no visible tangles.
Commercial & professional spaces
Robustness and refined finish for demanding environments: open spaces, meeting rooms, receptions, showrooms. Clean installation as wall baseboards or surface-mounted cable raceways.
5-step installation
Measure and cut
Supplied in 150 cm, cut it with a hacksaw to the desired length. The aluminum allows for a clean and precise cut.
Fix the base
Screw the base onto the wall or under your furniture using screws suitable for your surface (plaster, wood, concrete). Ensure it is level using a spirit level.
Install the separator
Insert the clip to create two distinct compartments: power on one side, low-voltage on the other.
Integrate electrical segments
Install SFC3 segments for areas to be electrified, or SFC2D blanks for areas to be protected (above stovetops or water points).
Clip on the cover
Close the trunking by clipping on the aluminum cover. The result is clean, discreet, and perfectly integrated into your décor.
Important: All electrical installation must be performed by a qualified person or licensed electrician, in accordance with applicable local standards. The SFC2D blank is mandatory above wet or heat-exposed areas.
Compatible with the EUBIQ ecosystem
The SH1 works in perfect synergy with all EUBIQ accessories:
SFC3 power segment
Integrate electrical outlets directly into the trunking to power your devices.
SFC2D blanking cover
Essential protection above water points or cooking areas.
RJ45 sockets
Can be integrated into the low-voltage compartment for a professional wired network.
Separator clip
Create two independent compartments to separate power and low-voltage lines.
Hanging bars and hooks
Clip onto the underside of the trunking to hang your kitchen utensils.
Angles and connectors
For corner installations or joining multiple lengths.
Frequently Asked Questions
Can the SH1 trunking be used outdoors?
The SH1 is primarily designed for indoor use. For outdoor installation, check the IP rating suitable for your environment and protect it from direct moisture. We recommend consulting an electrician for outdoor applications.
How do I cut the SH1 trunking to the right length?
A simple hacksaw is enough to cleanly cut the aluminum. Mark your measurement with a marker, guide the cut with a vice, and deburr the edges after cutting for a perfect finish.
Is the SH1 trunking suitable for kitchen installation?
Absolutely. The SH1 aluminum kitchen baseboard is one of the most common applications for this model. Use SFC2D blanking covers above cooking zones to ensure safety.
What is the difference between SH1 and a standard aluminum baseboard?
The SH1 is a complete electrification system: it includes compartments for cables, accepts electrical and RJ45 sockets, and allows for the suspension of accessories. A simple decorative baseboard does not offer these features.
Summary of key points
- ✅ Premium brushed black aluminum finish — adapts to all decor styles
- ✅ 150 cm custom-cuttable — one length for all your custom projects
- ✅ 2 independent compartments — power and low-voltage separated
- ✅ Compatible with RJ45 sockets and SFC3 electrical segments
- ✅ Hanging groove for kitchen accessories
- ✅ Residential and commercial use — home, office, retail
- ✅ Extruded aluminum — strength, lightweight, and durability
- ✅ Compliant with electrical installation standards
The EUBIQ SH1 trunking: the perfect combination of a high-end brushed black aluminum finish and a complete electrification system designed to simplify your everyday life.
Custom-cuttable, modular, elegant — every meter of wall becomes a clean, organized installation.
Discover compatible accessories
Brushed Aluminium
The stylish, modular power supply for your EUBIQ trunking
Transform your track into a continuous power source: plug in, slide, and reposition your outlets wherever you want, along the entire length of the track. No more unsightly power strips or trailing cables.
Why choose the SFC3 track?
The EUBIQ SFC3 system does more than just hide your cables: it turns your track into a genuine modular power source, where you can plug in and reposition your outlets at will.
Integrated design
Premium brushed aluminium finish that fits perfectly into modern and professional interiors. A clean and discreet result.
Maximum flexibility
7 lengths available from 50 to 150 cm to match your space exactly. Outlets can be repositioned at any time.
32A Power
Maximum current of 32 amps for heavy-duty use: professional kitchens, workshops, demanding open-plan offices.
Simplified wiring
Quick connector included for hassle-free implementation. Compatible with RH2 recessed chassis or SH1 surface-mounted chassis.
Technical specifications
7 available lengths
The SFC3 track adapts precisely to your installation thanks to a complete range of sizes.
Installation in 3 steps
Choose your chassis
Opt for the RH2 chassis (recessed, for invisible integration into a countertop or partition) or the SH1 (surface-mounted, with low-voltage compartment and groove for hooks or a utensil rail).
Wire the track using the quick connector
The included quick connector makes electrical connection accessible, even for those who aren't seasoned electricians. Insert the power cable into the designated connector according to your configuration (left or double-ended).
Slide and plug in your outlets
Once the track is clipped into its chassis, you can position your EUBIQ outlets anywhere you like along its length. The installation is clean, modular, and immediately operational.
Which chassis should you choose?
The SFC3 track is designed to fit into two types of EUBIQ chassis, depending on your needs and configuration.
RH2 Chassis — recessed
Recessed trunking (width 337.5 mm). Ideal for totally invisible integration into a countertop, facade, or partition. The result is clean, discreet, and high-end.
Invisible integrationSH1 Chassis — surface-mounted
Surface-mounted trunking with a low-voltage compartment and groove for hooks or a utensil rail. Perfect for a professional kitchen or a structured workspace.
Versatile and functionalFor what uses?
Residential kitchen
Power your home appliances in style, without a visible wall outlet. High-end finish for a polished interior.
Office and open-plan
Create clean workstations with power integrated into the desk. Reorganize without additional wiring.
Professional kitchen
Robust solution (32A) adapted to intensive environments. Withstands the demands of daily use in the catering industry.
Workshop or technical room
Integrate your outlets where you need them and reposition them at any time as your layout evolves.
SFC3 vs classic electrical trunking
| Criteria | Classic trunking | EUBIQ SFC3 track |
|---|---|---|
| Design | White or grey PVC, utilitarian look | Brushed aluminium, premium finish |
| Outlet modularity | Fixed outlets, set positions | Sliding outlets, repositionable |
| Current supported | Usually 16A | 32A – heavy-duty use possible |
| Certification | Variable | IEC/EN 61534 |
| Wiring | Traditional wiring | Quick connector included |
Frequently asked questions
Is the SFC3 compatible with all EUBIQ outlets?
Yes, the SFC3 track is designed to house all outlets and modules in the EUBIQ range that are compatible with the Power Track system.
Can multiple tracks be combined in one chassis?
Absolutely. You can link several SFC3 tracks together in a chassis of appropriate length to multiply the number of available power points.
Is an electrician required for installation?
The quick connector significantly simplifies the wiring process. However, any connection to the electrical grid must be performed or validated by a qualified professional, in accordance with current regulations.
What is the difference from standard electrical trunking?
Standard electrical trunking is mainly used to hide cables. The SFC3 track is an active component: it powers the outlets slid into it, with no visible wiring. It is an approach focused on design and modularity.
Practical information
Shipping
Shipping time: 7 days
Certification
CE / IEC/EN 61534
European compliance
IP40 Protection
Indoor use only. Not suitable for damp environments without additional protection.
The SFC3 track in brushed aluminium: the fusion of the technical rigor of a 32A certified component and the elegance of a premium finish.
Whether you are outfitting a high-end kitchen, an office, or a professional space, it offers you a modular, clean, and durable power supply — exactly where you need it.
Configure my installation
Compatibility: tracks and rails
The SFC2D is specifically designed for custom EUBIQ modular rails. It fits the following profiles:
Surface-mounted horizontal rail
Ideal for kitchens, offices, or workshops. Mounts directly onto the wall.
Recessed horizontal rail
Fits into walls or furniture for a discreet, flush integration.
Floor or horizontal surface rail
To be recessed into a countertop, raised floor, or horizontal surface.
If you are installing an aluminum electrical track in your kitchen (between cabinets and the countertop, for example), the SFC2D blank cover complements your power modules for a perfectly homogeneous integration.
Why choose the brushed aluminum finish?
Brushed aluminum is not just an aesthetic choice: it is also a guarantee of durability. Less susceptible to scratches and fingerprints than polished aluminum, it maintains its polished look over time, even in high-use environments.
Harmonizes with modern and industrial kitchens
Impact and corrosion resistant: much more durable than plastic
A simple wipe is enough to restore its original shine
Use a hacksaw to adjust it to the exact length of your rail
How to install the SFC2D blank cover?
Installation is intuitive and requires no electrical skills for this passive part.
Measure the free length in your RH1, RH2, or SH1 rail between your installed power segments.
Using a fine hacksaw, adjust the length of the blank cover to your measurement. The aluminum profile is easy to cut.
Insert the SFC2D into the rail groove, aligning the edges with the provided clips or channels.
The surface of the cover must be perfectly level with the other segments for a flawless finish.
FAQ
Can the SFC2D blank cover be used outdoors?
It is designed for indoor use. For outdoor aluminum tracks or protection ducts, check the IP rating suitable for your environment.
Can an SFC2D be replaced by an SFC3 power segment later?
Yes, that is the advantage of the EUBIQ modular system: you can remove the blank cover at any time and replace it with a power module if your needs change.
What is the difference between an SFC2D (blank cover) and an SFC3 (power segment)?
The SFC3 is an active segment containing power sockets or other modules. The SFC2D is a neutral closing panel: it has no electrical function, serving only for finishing and covering.
How many SFC2D covers do I need for a 3m rail?
One cover is 100 cm long. For 3 m, you will need 3 covers if the entire length needs to be covered. In practice, you should order according to the portion of the rail not equipped with power segments.
Can it be painted or anodized differently?
The brushed aluminum finish can be painted with metal-appropriate paint, but the original finish is already designed to integrate harmoniously into any modern interior.
The finishing touch for your EUBIQ rail.
Discreet, robust, elegant — the SFC2D blank cover transforms a technical space into a true element of interior architecture.
The pair — flawless finish from end to end
Neatly close off each end of your EUBIQ SH1 trunking. These brushed aluminum end caps snap on without tools or glue for an instant professional look. 25g of precision that makes all the difference.
Why end caps make all the difference
Well-installed trunking without end caps remains an unfinished project. These caps play both an aesthetic and protective role.
They hermetically seal the two open ends of the SH1 trunking, hiding the interior of the profile.
They protect cables from dust, impacts, and moisture at the ends of the trunking.
They provide a finished and professional look to your entire cable installation.
Perfectly adapted to EUBIQ SH1 trunking — no makeshift DIY required.
Technical specifications
What are they suitable for?
These caps fit into a wide variety of environments where SH1 cable trunking is used.
Concealing cables for TVs, internet boxes, hi-fi systems, for a living room or bedroom without visible wires.
Ideal for protecting hoses and cables of an air conditioning unit, with a discreet and durable aluminum finish.
To hide exposed pipes in a bathroom or kitchen, with a clean and neat look.
Offices, meeting rooms, commercial spaces: a clean cable installation reinforces the professional image of the space.
Installation in 3 simple steps
Ensure your SH1 trunking is correctly fixed to the wall or desired surface, with the cables inside.
Insert the end cap into one of the two open ends of the SH1 trunking. It fits precisely thanks to its custom-made design.
Repeat the process at the other end of the trunking. Your installation is now perfectly finished, from start to finish.
The pair: why it's essential
Trunking always has two ends. Therefore, these caps are systematically sold as a pair to save you from having to place a second order and to ensure a symmetrical result. A single item is enough to finalize your cable trunking installation, whether it is for interior wall trunking, exterior cable trunking, or specific uses like air conditioning pipe trunking.
Frequently asked questions
No, these caps are specifically designed for EUBIQ SH1 trunking. For other models, carefully check the reference of your trunking before ordering.
The brushed aluminum finish offers good resistance, but we recommend you verify the installation conditions of your SH1 trunking with the manufacturer for outdoor use exposed to the elements.
No. These caps snap directly onto the ends of the SH1 trunking, without additional fasteners.
The end cap closes the open ends of a trunking (start and end of the run). The joint cover is used to connect two sections of trunking together. These are definitely end caps.
Product summary information
Sometimes a single detail is enough to transform a decent cable installation into a truly professional result. Understated, precise, and designed to go unnoticed... while enhancing the whole setup.
Because a beautiful installation deserves a beautiful finish, right to the end.
Add to cart
Aluminium finish — clean and professional transition for every external corner
Designed exclusively for the EUBIQ SH1 trunking, this 90° external corner with an aluminium finish ensures a clean, solid, and discreet joint. Tool-free assembly, impeccable look: it blends in perfectly once installed.
Why choose a dedicated corner piece?
Perfect fit
Genuine part perfectly sized for the SH1 trunking. Zero play, zero misalignment: a precise, millimetric fit.
Protected cables
Unlike DIY cuts, there are no sharp edges to threaten the insulation of your electrical or network cables.
Tool-free installation
Simply snaps onto the trunking sections. No special tools required in the majority of configurations.
Aluminium finish
Elegant matte appearance, corrosion-resistant. Integrates discreetly into all professional and residential environments.
DIY cut vs. genuine corner
- Sharp edges dangerous for cables
- Imprecise joints and unsightly gaps
- Time-consuming (cutting, fitting, corrections)
- Unattractive look devalues the installation
- Smooth and safe surfaces
- Precise, gap-free fitting
- Installed in seconds
- Immediate professional result
Technical specifications
This corner is designed exclusively for SH1 trunking. It will not be compatible with other trunking references or brands. Double-check your trunking reference before purchasing.
Where to use it?
Workstations and offices
Manage IT and electrical cable routing around partition or furniture corners.
Workshops and technical areas
Neatly contour room corners without leaving cables exposed.
Residential settings
External corner wiring for living rooms, bedrooms, or hallways with a discreet finish matching the trunking.
Commercial premises
Maintain a neat appearance in spaces visible to customers or the public.
4-step installation guide
Cut your trunking lengths
Ensure your two SH1 trunking sections are correctly cut at 90° (straight cut, not mitered).
Position the corner
Snap the SH1 external corner onto the end of each section. The piece is designed to fit without force.
Check alignment
Visually verify that both trunking sections are well-aligned and the corner is perfectly applied against the wall surface.
Secure if necessary
Depending on your configuration, secure the trunking to the wall according to the SH1 range recommendations (screws or adhesive, depending on the substrate).
Aluminium finish: discretion and durability
Aluminium does not rust, even in slightly damp environments.
Only 30 g for this piece, facilitating handling during installation.
The finish perfectly matches the rest of the SH1 range for a harmonious installation.
Neither too shiny nor too matte: aluminium fits into most interiors and work environments.
Frequently asked questions
Is this corner compatible with other EUBIQ trunking?
No. It is designed specifically for SH1 trunking. For other items in the range, check the compatible accessories mentioned on each product sheet.
Can the angle be adjusted to something other than 90°?
No, this corner is fixed at 90°. If your configuration requires a different angle, consider an adjustable corner, available separately in the EUBIQ range.
Do I need to buy an internal corner as well?
It depends on your trunking route. The external corner is for a protruding corner (the trunking goes "around" a corner). For an inside corner (the trunking goes into a recess), you need an internal corner.
Is this accessory sold individually?
Yes, it is sold individually. Count one corner per corner of your installation.
Additional information
A perfect corner for a perfect installation.
Install, snap: the result speaks for itself.
Perfect 90° transition for every wall corner
Dedicated fitting for inside corners: simple interlocking, impeccable finish, and continuous protection for your cables. Available in silver aluminum or matte black.
Why choose this internal corner?
Perfect continuity
Fluid and aligned transition for inside wall corners, with no need for cutting or rough DIY fixes.
Cable protection
Your electrical, air conditioning, or network cables remain protected and concealed, even in corners.
Two finishes
Silver aluminum for a technical look or matte black for discreet integration — the choice is yours.
Immediate installation
Simple interlocking onto the SH1 trunking, with no specialized tools required. Professional results in seconds.
Technical specifications
What is it suitable for?
Electrical installations
Routing electrical cables through the corners of rooms, offices, or workshops.
AC trunking corner
Ideal for neatly covering air conditioning pipes or cables in internal corners.
Network or TV cables
Neat concealment of multimedia, Ethernet, or HDMI cables along wall corners.
Professional premises
Restaurants, hotels, offices: a modern aluminum finish that integrates into any environment.
Installation in 5 steps
Position the SH1 trunking
Install the first section of trunking along the wall, up to the internal corner.
Interlock the internal corner
Clip the SH1 internal corner onto the end of the first trunking section.
Connect the second section
Insert the second trunking section into the other opening, perpendicularly.
Check alignment
Ensure everything is securely interlocked and held properly on the wall mount.
Route your cables and close
Route your cables through the trunking and close the cover. You're done.
This corner is designed exclusively for EUBIQ's SH1 trunking. It is not compatible with other references or brands of trunking. The corner is fixed (90°) and not adjustable.
Frequently asked questions
What is the difference between an internal and an external corner?
The internal corner is used when the trunking needs to turn in an inside wall corner ("hollow" angle). The external corner is designed for protruding corners. Depending on your wall configuration, you may need both types.
Is this corner compatible with other trunking brands?
No. This internal corner is specifically designed for the EUBIQ brand SH1 trunking. It will not be compatible with trunking from other manufacturers, even if dimensions are similar.
Can it be used for air conditioning trunking?
Yes, if you are using SH1 trunking to cover your air conditioning cables, this AC trunking corner is perfectly suited for internal wall corners.
Can the corner be adjusted to angles other than 90°?
No, this corner is fixed at 90° and cannot be adjusted. It is only suitable for standard right-angled corners.
Clean finish, quick installation, professional results.
The SH1 internal corner transforms every wall corner into a clean, controlled detail.
The modular accessory that clears your countertop
Designed exclusively for the EUBIQ SH1 power track, this 400 mm aluminum bar allows you to hang spatulas, ladles, and utensils directly beneath your track. Installs in seconds, with no screws and no drilling required.
Why choose this support bar?
Manufactured exclusively for the SH1 track, it slides in effortlessly without extra screws. No makeshift DIY required.
Keep spatulas, ladles, tongs, and other utensils within reach. Free up your drawers and countertop space.
A modern, timeless look that naturally integrates into any contemporary kitchen.
Combine it with other EUBIQ SH1 accessories: shelves, storage, integrated power sockets… The track adapts to your needs.
Technical specifications
Installation in 3 steps
Slide the ends of the support bar into the tracks provided on the EUBIQ SH1 track.
A simple click is all it takes to hold the bar firmly in place, with no extra screws or drilling.
Hang hooks, spatulas, ladles, or tongs directly onto the bar. Your countertop is cleared!
Tip: For even more effective organization, combine several EUBIQ SH1 system accessories: shelves, storage, integrated power sockets… The SH1 track is designed to adapt to your needs.
Who is this support bar for?
Looking to adopt a modern power track system and organize your kitchen efficiently? This bar is the essential accessory for your SH1 track.
Looking for a reliable, aesthetic solution for your clients? The EUBIQ SH1 modular system offers a premium finish and fast installation on-site.
- ✅ Ideal for kitchens with an existing EUBIQ SH1 track
- ✅ Perfect for optimizing space above the countertop
- ✅ Suitable for kitchens with limited floor or countertop space
- ✅ Compatible with standard kitchen bar hooks and accessories
Frequently asked questions
No. This accessory is specifically designed to integrate into the EUBIQ SH1 power track system. It cannot be used independently or with other trunking systems.
No, no additional drilling is required for the bar itself. It fits directly into the SH1 track already fixed to the wall.
It is designed to support standard kitchen utensils (spatulas, ladles, tongs, etc.). For information on maximum load capacity, please refer to the EUBIQ technical documentation.
Yes, the SH1 system is fully modular. You can position and combine several bars based on the length of your track and your needs.
Technical documentation
This accessory is a fixture and organization product. It is not an electrical safety device. For all electrical installations, please hire a qualified professional.
No more cluttered countertops: your utensils are within reach, elegantly hung with a modern aluminum finish.
A small accessory, a big daily change.
Add to cart
330 cm — Compatible with SH1 profile exclusively
Create a reliable physical separation between your power cables (230 V) and your data cables (RJ45, telephony, home automation) in one single trunking, in full compliance with the NFC 15-100 standard.
Why separate high voltage and low voltage?
Can you run high voltage and low voltage in the same trunking? Yes — provided you use an approved physical divider. Here is why it is essential:
NFC 15-100 Compliance
The standard requires a physical separation between power cables (230 V) and low-signal cables (RJ45, telephony, etc.).
Zero interference
High voltage cables generate electromagnetic interference that degrades your network, audio, or home automation connections.
Enhanced safety
Physical separation reduces risks in the event of a high-voltage cable failure inside the trunking.
Optimized installation
One single trunking is enough, without sacrificing order or safety. Space-saving and aesthetic results guaranteed.
EUBIQ flange features
Covers almost the entire standard floor-to-ceiling height or a common partition length, without intermediate connectors.
Lightweight, easy to handle and position on your own, even at height on a ladder.
Designed and dimensioned specifically for the SH1 profile. Check your reference before ordering.
5-step installation
Installation is simple and requires no specific tools. Direct manual insertion into the profile.
Ensure the SH1 profile is securely fixed to the wall or ceiling and that all cables are removed or have not yet been installed.
If your run is shorter than 330 cm, cut the flange to the correct size with a hacksaw or suitable wire cutters.
Slide it into the SH1 profile rail until it stops. It positions itself in the center of the trunking to create two sealed compartments.
High voltage side (230 V cables, power supply) on one side of the flange; low voltage side (RJ45, telephony, HDMI, home automation…) on the other.
Installation is complete, clean, and up to code. No screws or glue needed.
Who is this separator for?
Professional Electricians
- New electrical installations or renovations
- NFC 15-100 compliance upgrades for existing installations
- Wiring for offices and professional premises
DIY Enthusiasts
- Housing renovations with surface-mounted trunking
- Home automation or home network projects
- Workshop or garage wiring
Full technical specifications
| Feature | Value |
|---|---|
| Brand | EUBIQ |
| Length | 330 cm |
| Dimensions (L × W × H) | 330 × 2 × 1 cm |
| Weight | 300 g |
| Compatibility | SH1 profile exclusively |
| Usage | High voltage / low voltage separation |
| Target standard | NFC 15-100 |
Frequently Asked Questions
Important note: this product is an electrical installation accessory. Its implementation must comply with the electrical standards in force (NFC 15-100). If in doubt, call a qualified electrician. This product does not in itself constitute a certificate of conformity for your installation.
One trunking, two perfectly separated worlds.
With this 330 cm EUBIQ flange, finally reconcile practicality and electrical compliance.
Showing 8/10
NextCollections featured
The French specialist in designer electrical tracks since 2008. Exclusive Eubiq importer in Europe — Dilectro Ltd.
The French specialist in designer electrical tracks since 2008. Exclusive Eubiq importer in Europe — Dilectro Ltd.