Recessed trunking
The RH2 profile fits discreetly into furniture thanks to its shallow depth (34 mm), without a cable compartment. A slim and sober solution for near-invisible integration into your tables, desks, and business corners.
5 products
Sort by:
5 products
Invisible electrification for your worktops and furniture
Integrated flush with the surface, the brushed aluminum RH2 track disappears into your furniture to provide modular power without any visual clutter. 150 cm cuttable length, 7 mm recess depth, compatible with all EUBIQ modules.
Why choose the RH2 track?
Technical specifications
| Reference | RH2 |
| Brand | EUBIQ |
| Length | 150 cm (cuttable) |
| External width | 8 cm |
| Total depth | 3.4 cm |
| Recess depth | 7 mm |
| Compartments | 1 |
| Material | Aluminum |
| Finish | Brushed aluminum |
| Weight | 1,700 g |
| Packaging dimensions (L × W × H) | 150 × 8 × 3 cm |
For which spaces?
Installation in 5 steps
Recessed vs. surface: what is the difference?
- Fixes onto the surface, remains visible
- Intended for cable routing
- Utilitarian look
- Type: omega track, Legrand...
- Integrates flush with the surface
- Active functional modules (outlets, USB...)
- Designer, professional look
- Premium brushed aluminum
Frequently Asked Questions
Is the RH2 compatible with standard power outlets?
Can the track be cut to a length shorter than 150 cm?
Is the RH2 track suitable for drywall (plasterboard)?
Is an electrician required to install this track?
How does it differ from a Legrand or omega aluminum track?
Transform any piece of furniture into a connected, designer space — without compromising on aesthetics.
The RH2 recessed track: the perfect alliance of brushed aluminum and discreet electrification.
Add to cart
Brushed Aluminium
The stylish, modular power supply for your EUBIQ trunking
Transform your track into a continuous power source: plug in, slide, and reposition your outlets wherever you want, along the entire length of the track. No more unsightly power strips or trailing cables.
Why choose the SFC3 track?
The EUBIQ SFC3 system does more than just hide your cables: it turns your track into a genuine modular power source, where you can plug in and reposition your outlets at will.
Integrated design
Premium brushed aluminium finish that fits perfectly into modern and professional interiors. A clean and discreet result.
Maximum flexibility
7 lengths available from 50 to 150 cm to match your space exactly. Outlets can be repositioned at any time.
32A Power
Maximum current of 32 amps for heavy-duty use: professional kitchens, workshops, demanding open-plan offices.
Simplified wiring
Quick connector included for hassle-free implementation. Compatible with RH2 recessed chassis or SH1 surface-mounted chassis.
Technical specifications
7 available lengths
The SFC3 track adapts precisely to your installation thanks to a complete range of sizes.
Installation in 3 steps
Choose your chassis
Opt for the RH2 chassis (recessed, for invisible integration into a countertop or partition) or the SH1 (surface-mounted, with low-voltage compartment and groove for hooks or a utensil rail).
Wire the track using the quick connector
The included quick connector makes electrical connection accessible, even for those who aren't seasoned electricians. Insert the power cable into the designated connector according to your configuration (left or double-ended).
Slide and plug in your outlets
Once the track is clipped into its chassis, you can position your EUBIQ outlets anywhere you like along its length. The installation is clean, modular, and immediately operational.
Which chassis should you choose?
The SFC3 track is designed to fit into two types of EUBIQ chassis, depending on your needs and configuration.
RH2 Chassis — recessed
Recessed trunking (width 337.5 mm). Ideal for totally invisible integration into a countertop, facade, or partition. The result is clean, discreet, and high-end.
Invisible integrationSH1 Chassis — surface-mounted
Surface-mounted trunking with a low-voltage compartment and groove for hooks or a utensil rail. Perfect for a professional kitchen or a structured workspace.
Versatile and functionalFor what uses?
Residential kitchen
Power your home appliances in style, without a visible wall outlet. High-end finish for a polished interior.
Office and open-plan
Create clean workstations with power integrated into the desk. Reorganize without additional wiring.
Professional kitchen
Robust solution (32A) adapted to intensive environments. Withstands the demands of daily use in the catering industry.
Workshop or technical room
Integrate your outlets where you need them and reposition them at any time as your layout evolves.
SFC3 vs classic electrical trunking
| Criteria | Classic trunking | EUBIQ SFC3 track |
|---|---|---|
| Design | White or grey PVC, utilitarian look | Brushed aluminium, premium finish |
| Outlet modularity | Fixed outlets, set positions | Sliding outlets, repositionable |
| Current supported | Usually 16A | 32A – heavy-duty use possible |
| Certification | Variable | IEC/EN 61534 |
| Wiring | Traditional wiring | Quick connector included |
Frequently asked questions
Is the SFC3 compatible with all EUBIQ outlets?
Yes, the SFC3 track is designed to house all outlets and modules in the EUBIQ range that are compatible with the Power Track system.
Can multiple tracks be combined in one chassis?
Absolutely. You can link several SFC3 tracks together in a chassis of appropriate length to multiply the number of available power points.
Is an electrician required for installation?
The quick connector significantly simplifies the wiring process. However, any connection to the electrical grid must be performed or validated by a qualified professional, in accordance with current regulations.
What is the difference from standard electrical trunking?
Standard electrical trunking is mainly used to hide cables. The SFC3 track is an active component: it powers the outlets slid into it, with no visible wiring. It is an approach focused on design and modularity.
Practical information
Shipping
Shipping time: 7 days
Certification
CE / IEC/EN 61534
European compliance
IP40 Protection
Indoor use only. Not suitable for damp environments without additional protection.
The SFC3 track in brushed aluminium: the fusion of the technical rigor of a 32A certified component and the elegance of a premium finish.
Whether you are outfitting a high-end kitchen, an office, or a professional space, it offers you a modular, clean, and durable power supply — exactly where you need it.
Configure my installation
Compatibility: tracks and rails
The SFC2D is specifically designed for custom EUBIQ modular rails. It fits the following profiles:
Surface-mounted horizontal rail
Ideal for kitchens, offices, or workshops. Mounts directly onto the wall.
Recessed horizontal rail
Fits into walls or furniture for a discreet, flush integration.
Floor or horizontal surface rail
To be recessed into a countertop, raised floor, or horizontal surface.
If you are installing an aluminum electrical track in your kitchen (between cabinets and the countertop, for example), the SFC2D blank cover complements your power modules for a perfectly homogeneous integration.
Why choose the brushed aluminum finish?
Brushed aluminum is not just an aesthetic choice: it is also a guarantee of durability. Less susceptible to scratches and fingerprints than polished aluminum, it maintains its polished look over time, even in high-use environments.
Harmonizes with modern and industrial kitchens
Impact and corrosion resistant: much more durable than plastic
A simple wipe is enough to restore its original shine
Use a hacksaw to adjust it to the exact length of your rail
How to install the SFC2D blank cover?
Installation is intuitive and requires no electrical skills for this passive part.
Measure the free length in your RH1, RH2, or SH1 rail between your installed power segments.
Using a fine hacksaw, adjust the length of the blank cover to your measurement. The aluminum profile is easy to cut.
Insert the SFC2D into the rail groove, aligning the edges with the provided clips or channels.
The surface of the cover must be perfectly level with the other segments for a flawless finish.
FAQ
Can the SFC2D blank cover be used outdoors?
It is designed for indoor use. For outdoor aluminum tracks or protection ducts, check the IP rating suitable for your environment.
Can an SFC2D be replaced by an SFC3 power segment later?
Yes, that is the advantage of the EUBIQ modular system: you can remove the blank cover at any time and replace it with a power module if your needs change.
What is the difference between an SFC2D (blank cover) and an SFC3 (power segment)?
The SFC3 is an active segment containing power sockets or other modules. The SFC2D is a neutral closing panel: it has no electrical function, serving only for finishing and covering.
How many SFC2D covers do I need for a 3m rail?
One cover is 100 cm long. For 3 m, you will need 3 covers if the entire length needs to be covered. In practice, you should order according to the portion of the rail not equipped with power segments.
Can it be painted or anodized differently?
The brushed aluminum finish can be painted with metal-appropriate paint, but the original finish is already designed to integrate harmoniously into any modern interior.
The finishing touch for your EUBIQ rail.
Discreet, robust, elegant — the SFC2D blank cover transforms a technical space into a true element of interior architecture.
Pair of end caps for RH1 and RH2 trunking
-
FeaturesEnd caps to be fixed to the ends of the RH trunking.
RH recessed trunking is ideal for offices, meeting tables and workstations. It combines elegant design and functionality, allowing for the creation of fully electrified furniture with various multimedia connectors. This RH power rail can be integrated into a table or a wall thanks to different installation methods.
-
Associated products
- RH1 Chassis
- RH2 Chassis
- SFC3 Power Segment
- Blanking Plate
- End Caps
- Separation Flange
- Separation Plate
- DS3 Housing
- DS4 Housing
Additional information
- Brand : EUBIQ
- Weight : 17 g
- Dimensions (L × W × H) : 9 × 4 × 1 cm
The compact module that turns your trunking into a network connection point
House a Keystone connector (RJ45, USB, HDMI) directly in your EUBIQ SH1 or RH2 trunking. Installation in seconds, sleek aluminium finish, zero wall drilling. The professional, discreet, and modular network solution.
What is the DS4 housing used for?
The DS4 housing is a modular Keystone-format support designed to be recessed into compatible electrical trunking and skirting boards. It acts as an interface between the trunking and the connector of your choice, allowing you to create a neat and functional RJ45 wall socket integrated into the trunking, without drilling into the wall.
It is the ideal solution for network installations in open spaces, meeting rooms, landscaped offices, or any area where network cables need to remain organized and accessible.
Why choose the DS4?
Versatile
Accepts RJ45, USB, and HDMI connectors in standard Keystone format. A single housing for multiple network and multimedia uses.
Immediate installation
Tool-free clipping in seconds. No wall drilling required: the module clips directly into the trunking.
Ultra compact
Only 30 × 27 mm and 16g. Reduced dimensions that fit without cluttering the space available in the trunking.
Sleek finish
Plastic housing with an aluminium finish, available in silver and black. Fits perfectly in both professional offices and home installations.
Technical specifications
Compatible connectors
The Keystone format is a widely used standard in network and multimedia installations. The DS4 housing accepts different types of modules:
RJ45 Cat. 5e / 6 / 6A
For Ethernet network. High-speed wired connection for workstations and network equipment.
USB Keystone
For charging or data transfer. Add a USB port accessible directly from the trunking.
HDMI Keystone
For high-definition video. Ideal for meeting rooms and presentation areas.
Warning: Always check the depth of the Keystone connector you intend to use before purchasing. Some deeper modules may not fit correctly in the trunking depending on the available rear space.
Compatibility with EUBIQ trunking
The DS4 housing is designed exclusively to fit into two trunking models from the EUBIQ range:
SH1 Trunking
337.5 mm brushed aluminium chassis for elegant wall mounting. Ideal for exposed installations in offices and workspaces.
RH2 Trunking
337.5 mm recessed rail chassis, aluminium finish. Perfect for recessed installations and custom designs.
These trunking systems are designed to accommodate standardized modules (electrical sockets, RJ45 ports, multimedia connectors). The DS4 clips into them easily, without any specific tools.
Installation in 5 steps
Choose your connector
Select your Keystone module (RJ45, USB, HDMI), verifying the depth is compatible with your SH1 or RH2 trunking.
Clip the module
Insert the Keystone module into the DS4 housing. The locking mechanism is simple and requires no tools.
Insert into the trunking
Place the housing + connector assembly into the available slot in your SH1 or RH2 trunking.
Connect the cable
Connect your network cable to the back of the RJ45 Keystone connector according to T568A or T568B wiring.
Close the trunking
Your integrated RJ45 socket is ready for use, for a clean and professional network installation.
Frequently asked questions
Is the DS4 compatible with RJ45 Cat. 6A connectors?
Yes, provided that the depth of the Cat. 6A Keystone module is compatible with the depth available in the trunking. Check the Keystone core dimensions before purchasing.
Can this housing be used in trunking other than SH1 and RH2?
The DS4 is specifically designed for EUBIQ SH1 and RH2 trunking. Compatibility with other trunking brands (Legrand, Hager, etc.) is not guaranteed.
Does the DS4 housing come with an RJ45 connector?
No, the DS4 housing is sold alone (without a connector). The RJ45 Keystone module must be ordered separately according to your needs (Cat. 5e, 6, 6A, etc.).
How many housings can be installed in one piece of trunking?
The number of housings depends on the number of available slots on your trunking, as well as the other modules already installed (electrical sockets, switches, etc.).
What is the difference from a standard wall-mounted RJ45 socket?
A classic wall-mounted RJ45 socket is recessed into a wall box. The DS4, however, clips directly into surface-mounted trunking (SH1 or RH2), without drilling into the wall. Ideal for offices and professional spaces where recessed installation is not possible.
The EUBIQ DS4 housing turns your trunking into a true network connection point.
Compact, stylish, universal Keystone compatible — it installs in seconds.
Collections featured
The French specialist in designer electrical tracks since 2008. Exclusive Eubiq importer in Europe — Dilectro Ltd.
The French specialist in designer electrical tracks since 2008. Exclusive Eubiq importer in Europe — Dilectro Ltd.