Strong/weak current separation flange - 330 cm for SH1 profile

High voltage refers to electrical circuits powered by 230V, such as your power outlets, lighting, or household appliances. Low voltage, on the other hand, includes all low-voltage signal cables: computer networks (RJ45), telephony, home automation, audio, video, or even intercom systems. These two types of cables generate very different energy levels, and their cohabitation without physical separation can cause electromagnetic interference that degrades the quality of your network connections or audio signal. Furthermore, the NFC 15-100 standard mandates a physical separation between these two types of wiring when they run in the same cable duct. The EUBIQ separator clip for the SH1 profile meets this exact requirement.

No, this separator clip is designed and sized exclusively for the EUBIQ SH1 profile. Its shape and dimensions (330 × 2 × 1 cm) are adapted to the interior of this specific profile to ensure reliable support and a sealed separation between your two wiring compartments. If you are using a different EUBIQ duct model or one from another brand, we recommend that you check the corresponding separator part number with your distributor before placing an order. An unsuitable clip would guarantee neither mechanical stability nor compliance with the NFC 15-100 standard.

Absolutely. If your duct run is shorter than 330 cm, you can cut the clip to the desired size. A fine hacksaw or a rotary tool like a Dremel is sufficient to obtain a clean and precise cut. We advise you to carefully measure the necessary length and cut square for a clean finish and optimal positioning in the SH1 profile. The lightweight material of the clip (300g for 330 cm) greatly facilitates this operation.

No, the installation of this separator clip is accessible to both professional electricians and DIY enthusiasts. No tools are required for the installation itself: simply insert the clip vertically into the SH1 profile rail and slide it into place. It sits in the center of the duct and naturally divides the space into two distinct compartments. If cutting is necessary to adjust the length, a simple hacksaw or rotary tool will do. However, if you have any doubts about your electrical installation as a whole, we recommend calling a qualified electrician, in accordance with the requirements of the NFC 15-100 standard.

The EUBIQ separator clip is an essential accessory for meeting the physical separation requirement imposed by the NFC 15-100 standard between high-voltage and low-voltage cables. However, it is just one element of a compliant installation: the quality of the cables used, their installation, the upstream electrical protections, and your entire electrical panel also come into play. This product alone does not provide a certificate of conformity for your installation. In case of doubt or for full compliance, we recommend consulting a certified electrician who can validate your entire installation.

Once the clip is in place in your SH1 profile, you have two distinct compartments to use for dedicated purposes. On the high-voltage side, you can run your 230V power cables, such as those for power outlets or lighting. On the low-voltage side, you can group all your signal cables: RJ45 network cables, telephone cables, HDMI cables, home automation, sound system, or intercom cables. This clear organization ensures not only regulatory compliance but also an installation that is legible and easily scalable if you wish to add new equipment later on.